+86 531 62301920 bearing02@skfswd.com
 |
| Quantity: | |
|---|---|
29434 E
Thrust roller bearings are used to bear the combined axial and radial loads mainly under the axial load, but the radial load shall not exceed 55% of the axial load. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and self-aligning performance.
| Designation | Principal Dimension | Basic Load Ratings(KN) | Speed ratings(r/min) | Weight (kg) | |||
| d | D | B | Dynamic | Static | Grease | ||
| 29412 | 60 | 130 | 42 | 293 | 854 | 2700 | 2.61 |
| 29413 | 65 | 140 | 45 | 344 | 1000 | 2500 | 3.34 |
| 29414 | 70 | 150 | 48 | 378 | 1110 | 2300 | 4.06 |
| 29415 | 75 | 160 | 51 | 438 | 1270 | 2100 | 4.76 |
| 29416 | 80 | 170 | 54 | 468 | 1380 | 2000 | 5.91 |
| 29417 | 85 | 180 | 58 | 536 | 1610 | 1900 | 7.04 |
| 29418 | 90 | 160 | 60 | 598 | 1810 | 1800 | 8.18 |
| 29420 | 100 | 210 | 67 | 722 | 2220 | 1650 | 11.2 |
| 29422 | 110 | 230 | 73 | 845 | 2610 | 1500 | 14.7 |
Thrust roller bearings are used to bear the combined axial and radial loads mainly under the axial load, but the radial load shall not exceed 55% of the axial load. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and self-aligning performance.
| Designation | Principal Dimension | Basic Load Ratings(KN) | Speed ratings(r/min) | Weight (kg) | |||
| d | D | B | Dynamic | Static | Grease | ||
| 29412 | 60 | 130 | 42 | 293 | 854 | 2700 | 2.61 |
| 29413 | 65 | 140 | 45 | 344 | 1000 | 2500 | 3.34 |
| 29414 | 70 | 150 | 48 | 378 | 1110 | 2300 | 4.06 |
| 29415 | 75 | 160 | 51 | 438 | 1270 | 2100 | 4.76 |
| 29416 | 80 | 170 | 54 | 468 | 1380 | 2000 | 5.91 |
| 29417 | 85 | 180 | 58 | 536 | 1610 | 1900 | 7.04 |
| 29418 | 90 | 160 | 60 | 598 | 1810 | 1800 | 8.18 |
| 29420 | 100 | 210 | 67 | 722 | 2220 | 1650 | 11.2 |
| 29422 | 110 | 230 | 73 | 845 | 2610 | 1500 | 14.7 |